添加GD32H7的CMake工程

This commit is contained in:
2026-07-23 19:44:30 +08:00
commit d07f065b1c
202 changed files with 204039 additions and 0 deletions
@@ -0,0 +1,69 @@
/*!
\file msc_bbb.h
\brief definitions for the USB MSC BBB(bulk/bulk/bulk) protocol
\version 2025-01-24, V1.4.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef MSC_BBB_H
#define MSC_BBB_H
#include "usb_ch9_std.h"
#define BBB_CBW_SIGNATURE 0x43425355U /*!< MSC BBB CBW signature */
#define BBB_CSW_SIGNATURE 0x53425355U /*!< MSC BBB CSW signature */
#define BBB_CBW_LENGTH 31U /*!< MSC BBB CBW length */
#define BBB_CSW_LENGTH 13U /*!< MSC BBB CSW length */
typedef struct {
uint32_t dCBWSignature; /*!< CBW signature */
uint32_t dCBWTag; /*!< CBW tag */
uint32_t dCBWDataTransferLength; /*!< CBW signature */
uint8_t bmCBWFlags; /*!< CBW flags */
uint8_t bCBWLUN; /*!< CBW LUN */
uint8_t bCBWCBLength; /*!< CBW length */
uint8_t CBWCB[16]; /*!< CBW CB */
} msc_bbb_cbw;
typedef struct {
uint32_t dCSWSignature; /*!< CSW signature */
uint32_t dCSWTag; /*!< CSW tag */
uint32_t dCSWDataResidue; /*!< CSW data residuer */
uint8_t bCSWStatus; /*!< CSW status */
} msc_bbb_csw;
/* CSW command status */
enum msc_csw_status {
CSW_CMD_PASSED = 0U, /*!< CSW passed command status */
CSW_CMD_FAILED, /*!< CSW failed command status */
CSW_PHASE_ERROR /*!< CSW phase error status */
};
#endif /* MSC_BBB_H */
@@ -0,0 +1,117 @@
/*!
\file msc_scsi.h
\brief definitions for the USB MSC SCSI commands
\version 2025-01-24, V1.4.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef MSC_SCSI_H
#define MSC_SCSI_H
#include "usb_ch9_std.h"
/* SCSI commands */
#define SCSI_FORMAT_UNIT 0x04U /*!< MSC SCSI format unit */
#define SCSI_INQUIRY 0x12U /*!< MSC SCSI inquiry */
#define SCSI_MODE_SELECT6 0x15U /*!< MSC SCSI select6 mode */
#define SCSI_MODE_SELECT10 0x55U /*!< MSC SCSI select10 mode */
#define SCSI_MODE_SENSE6 0x1AU /*!< MSC SCSI sense6 mode */
#define SCSI_READ_TOC_DATA 0x43U /*!< MSC SCSI read TOC data */
#define SCSI_MODE_SENSE10 0x5AU /*!< MSC SCSI sense10 mode */
#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1EU /*!< MSC SCSI allow medium removal */
#define SCSI_READ6 0x08U /*!< MSC SCSI read6 */
#define SCSI_READ10 0x28U /*!< MSC SCSI read10 */
#define SCSI_READ12 0xA8U /*!< MSC SCSI read12 */
#define SCSI_READ16 0x88U /*!< MSC SCSI read16 */
#define SCSI_READ_CAPACITY10 0x25U /*!< MSC SCSI read capacity10 */
#define SCSI_READ_CAPACITY16 0x9EU /*!< MSC SCSI read capacity16 */
#define SCSI_REQUEST_SENSE 0x03U /*!< MSC SCSI request sense */
#define SCSI_START_STOP_UNIT 0x1BU /*!< MSC SCSI start stop unit */
#define SCSI_TEST_UNIT_READY 0x00U /*!< MSC SCSI test unit ready */
#define SCSI_WRITE6 0x0AU /*!< MSC SCSI write6 */
#define SCSI_WRITE10 0x2AU /*!< MSC SCSI write10 */
#define SCSI_WRITE12 0xAAU /*!< MSC SCSI write12 */
#define SCSI_WRITE16 0x8AU /*!< MSC SCSI write16 */
#define SCSI_VERIFY10 0x2FU /*!< MSC SCSI verify10 */
#define SCSI_VERIFY12 0xAFU /*!< MSC SCSI verify12 */
#define SCSI_VERIFY16 0x8FU /*!< MSC SCSI verify16 */
#define SCSI_SEND_DIAGNOSTIC 0x1DU /*!< MSC SCSI send diagnostic */
#define SCSI_READ_FORMAT_CAPACITIES 0x23U /*!< MSC SCSI read format capacities */
#define INVALID_CDB 0x20U /*!< invalid CDB */
#define INVALID_FIELD_IN_COMMAND 0x24U /*!< invalid field in command */
#define PARAMETER_LIST_LENGTH_ERROR 0x1AU /*!< parameter list length error */
#define INVALID_FIELD_IN_PARAMETER_LIST 0x26U /*!< invalid field in parameter list */
#define ADDRESS_OUT_OF_RANGE 0x21U /*!< address out of range */
#define MEDIUM_NOT_PRESENT 0x3AU /*!< medium not present */
#define MEDIUM_HAVE_CHANGED 0x28U /*!< medium have changed */
#define WRITE_PROTECTED 0x27U /*!< write protected */
#define UNRECOVERED_READ_ERROR 0x11U /*!< unrecovered read error */
#define WRITE_FAULT 0x03U /*!< write fault */
#define READ_FORMAT_CAPACITY_DATA_LEN 0x0CU /*!< read format capacity data length */
#define READ_CAPACITY10_DATA_LEN 0x08U /*!< read capacity10 data length */
#define MODE_SENSE10_DATA_LEN 0x08U /*!< sense10 mode data length */
#define MODE_SENSE6_DATA_LEN 0x04U /*!< sense6 mode data length */
#define READ_TOC_CMD_LEN 0x14U /*!< read TOC command length */
#define REQUEST_SENSE_DATA_LEN 0x12U /*!< request sense data length */
#define STANDARD_INQUIRY_DATA_LEN 0x24U /*!< standard inquiry data length */
#define BLKVFY 0x04U /*!< block verify */
enum sense_state {
NO_SENSE = 0U, /*!< MSC SCSI Sense NO_SENSE state */
RECOVERED_ERROR, /*!< MSC SCSI Sense RECOVERED_ERROR */
NOT_READY, /*!< MSC SCSI Sense NOT READY state*/
MEDIUM_ERROR, /*!< MSC SCSI Sense MEDIUM ERROR state*/
HARDWARE_ERROR, /*!< MSC SCSI Sense HARDWARE ERROR state*/
ILLEGAL_REQUEST, /*!< MSC SCSI Sense ILLEGAL REQUEST state*/
UNIT_ATTENTION, /*!< MSC SCSI Sense UNIT ATTENTION state*/
DATA_PROTECT, /*!< MSC SCSI Sense DATA PROTECT state*/
BLANK_CHECK, /*!< MSC SCSI Sense BLANK CHECK state*/
VENDOR_SPECIFIC, /*!< MSC SCSI Sense VENDOR SPECIFIC state*/
COPY_ABORTED, /*!< MSC SCSI Sense COPY ABORTED state*/
ABORTED_COMMAND, /*!< MSC SCSI Sense ABORTED COMMAND state*/
RESERVED, /*!< MSC SCSI Sense RESERVED state*/
VOLUME_OVERFLOW, /*!< MSC SCSI Sense VOLUME OVERFLOW state*/
MISCOMPARE /*!< MSC SCSI Sense MISCOMPARE state*/
};
typedef struct {
uint8_t SenseKey; /*!< MSC SCSI SenseKey */
uint32_t Information; /*!< MSC SCSI sense Information */
uint8_t ASC; /*!< MSC SCSI sense ASC */
uint8_t ASCQ; /*!< MSC SCSI sense ASCQ */
} msc_scsi_sense;
#endif /* MSC_SCSI_H */
@@ -0,0 +1,68 @@
/*!
\file usb_msc.h
\brief definitions for the USB MSC class
\version 2025-01-24, V1.4.0, firmware for GD32H7xx
*/
/*
Copyright (c) 2025, GigaDevice Semiconductor Inc.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors
may be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
*/
#ifndef USB_MSC_H
#define USB_MSC_H
#include "usb_ch9_std.h"
/* mass storage device class code */
#define USB_CLASS_MSC 0x08U
/* mass storage subclass code */
#define USB_MSC_SUBCLASS_RBC 0x01U /*!< MSC RBC subclass */
#define USB_MSC_SUBCLASS_ATAPI 0x02U /*!< MSC ATAPI subclass */
#define USB_MSC_SUBCLASS_UFI 0x04U /*!< MSC UFI subclass */
#define USB_MSC_SUBCLASS_SCSI 0x06U /*!< MSC SCSI subclass */
#define USB_MSC_SUBCLASS_LOCKABLE 0x07U /*!< MSC LOCKABLE subclass */
#define USB_MSC_SUBCLASS_IEEE1667 0x08U /*!< MSC IEEE1667 subclass */
/* mass storage interface class control protocol codes */
#define USB_MSC_PROTOCOL_CBI 0x00U /*!< MSC CBI protocol */
#define USB_MSC_PROTOCOL_CBI_ALT 0x01U /*!< MSC CBI ALT protocol */
#define USB_MSC_PROTOCOL_BBB 0x50U /*!< MSC BBB protocol */
/* mass storage request codes */
#define USB_MSC_REQ_CODES_ADSC 0x00U /*!< MSC ADSC request */
#define USB_MSC_REQ_CODES_GET 0xFCU /*!< MSC GET request */
#define USB_MSC_REQ_CODES_PUT 0xFDU /*!< MSC PUT request */
#define USB_MSC_REQ_CODES_GML 0xFEU /*!< MSC GML request */
#define USB_MSC_REQ_CODES_BOMSR 0xFFU /*!< MSC BOMSR request */
#define BBB_GET_MAX_LUN 0xFEU /*!< MSC BBB get maximum LUN */
#define BBB_RESET 0xFFU /*!< MSC BBB reset */
#define SCSI_CMD_LENGTH 16U /*!< MSC SCSI command length */
#endif /* USB_MSC_H */